|
|
Design and analysis of electronically reconfigurable filtering structures
Kříčka, Tomáš ; Dvořák, Jan (referee) ; Langhammer, Lukáš (advisor)
This bachelor thesis deals with the proposal of analog filters with the ability of the electronic reconfiguration. The main aim was to propose three fully electronically reconfigurable filters using different methods. The work focuses on the use of modern active elements that ensure the electronic reconfiguration. Specifically on operational transconductivity amplifiers, second-generation current conveyors and current amplifiers. The transfer functions are simulated in the Orcad PSpice software, at the ideal and behavioral level. Sensitivity and parasitic analysis is applied to the two proposed filtration structures. Both structures are made on printed circuit boards, which are measured and then their transfer functions are compared with the simulated functions.
|
|
|
Electronically reconfigurable frequency filters
Gajdoš, Adam ; Langhammer, Lukáš (referee) ; Jeřábek, Jan (advisor)
The aim of the thesis was design of reconnection-less and electronically reconfigurable filters of SISO type with non-traditional active elements. Adjustability of bandwidth or quality factor is also required. First part of the thesis deals with theoretical analysis of filters, their operation modes and design of frequency filters using Signal-flow graph method aswell. Last but not least, electronical reconfiguration of transfer function and parasitic analysis was discussed. Another part describes active elements used in the practical part of thesis. Behaviors and design of active elements using existing circuits (e.g. UCC,EL2082) are described and their transformation into the Signal-flow graph form too. In the practical part five reconnection-less and reconfigurable filters of SISO type was designed using SNAP program. Simulations were done using Orcad program with ideal and real simulation models of active elements. Last part deals with filter design in EAGLE and experimental measurement.
|
|
|
Frequency filters with untraditional combination of active elements
Filgas, Jaroslav ; Herencsár, Norbert (referee) ; Jeřábek, Jan (advisor)
The Bachelor’s thesis deals with the theory and designing of analog frequency filters of the second order, which operate in current mode and use the untraditional combination of active elements. The filters are designed by means of the autonomous circuits. Active elements used in the design is Multiple Output Current Follower MO-CF, Digitally Controlled Current Amplifier DACA, Generalized Current Mirror and Inverters GCMI, Balanced Operational Transconductance Amplifier BOTA, Inverting Current Conveyor 1st and 3rd Generation ICCI/ICCIII and Universal Voltage Conveyor UVC. The proposed filters work in current mode and their ideal and real models are verified in the simulation environment OrCad. The thesis is structured into five chapters including the conclusion. The first chapter gives the general characteristics of the frequency filters, types of filter functions, types of filters and general equations. The second chapter is devoted to the theory of the active elements. The third charter is about methods of designing and the fourth includes custom designed filters, including their transfer functions and the results verify their functionality in the simulation environment.
|
|
|
Synthesis of differential filtering structures with complex active elements
Pánek, David ; Kubánek, David (referee) ; Langhammer, Lukáš (advisor)
This document is focused on already existing single-ended frequency filters with modern active components working in current mode and their modification into fully-differential ended form. After the modification both versions were compared between each other. The first part informs about problems concerning analogue frequency filters. The second part deals with used active components - MO-CF (Multiple Output Current Follower), BOTA (Balanced transconductance amplifier), UCC (universal current conveyor), VDTA (Voltage differencing transconductance amplifier), CDTA (Current differencing transconductance amplifier) and VDCC (voltage differencing current conveyor). Four circuits have been chosen and transformed into their differential form. Two circuits have been chosen and realised into PCB and then practicaly measured in a laboratory. The last part is a summary of simulations and measured results and check of circuits behavior result.
|
|
|
Analysis of filter structures with controllable amplifiers
Pánek, David ; Langhammer, Lukáš (referee) ; Polák, Josef (advisor)
This bachelor thesis is focused on simulations and practical realizations of already existing frequency filters with modern active components in current mode. New simulation ABM model (Analog Behavioral Model) of DACA (Digital Adjustable Current Amplifier) element was used in the simulations. The first part informs about problems concerning analogue frequency filters. The second part deals with used active components - DACA (Digital Adjustable Current Amplifier), MO-CF (Multiple Output Current Follower), BOTA (Balanced transconductance amplifier) and UCC (universal current conveyor). Four circuits have been chosen and implemented into PCB (printed circuit board) on the basis of simulation results. The first circuit tunes the quality factor with help of DACA component. The second circuit tunes the natural frequency and quality factor with help of DACA components. The third and the fourth circuits are simulated and implemented in differential and also in single ended forms. These circuits tune the natural frequency with help of the same set of current amplification by DACA components. The last part is summary of simulation’s and practical measurement‘s result of this project.
|
|
|
Frequency Filters with Current Active Elements
Jeřábek, Jan ; Ondráček,, Oldřich (referee) ; Kolka, Zdeněk (referee) ; Vrba, Kamil (advisor)
This doctoral thesis is focused mainly on research of new current active elements and their applications in frequency filters suitable for current-mode. Work is focused on design of new filtering structures suitable for traditional single-ended signal processing and also on structures suitable for fully-differential applications. The thesis contains three designed general conceptions of KHN-type second-order filters. Adjustability of quality factor and pole frequency is provided by controllable current amplifiers that are placed properly in designed structures. Structures also contain second-generation current conveyors, multiple-output current followers, transconductance amplifiers and their fully-differential equivalents. There are lot of possible solutions that could be obtained from general structures, some of them are presented in the work. The thesis also presents several multifunctional and also single-purpose filtering structures of second-order and two variants of n-th order synthetic elements which are suitable to realize higher order filters both in single ended and fully differential type. In each case, functionality of new solutions is verified by simulations and in several cases also by real measurement.
|
|
|
Synthesis of frequency filters with ability of the electronic reconfiguration
Theumer, Radek ; Šotner, Roman (referee) ; Langhammer, Lukáš (advisor)
This bachelor thesis deals with proposal of frequency filters providing electronic controllability of its transfer function. The main aim was to propose new filtering structures working in voltage and current mode based on suitable proposal methods. Active elements are implemented by available operational transconductance amplifiers, current amplifiers and conveyors, eventually voltage amplifiers. Four different active controllable filters are presented. Their function is simulated in software PSpice with help of models at transistor level in comparison with ideal behavior (idealized models). Two designed filtering structures were chosen and complemented on parasitic, sensitivity, stability, temperature analysis and Monte Carlo analysis. These circuits were realized on PCB. Measurement results are presented at the end of thesis, including comparison with simulations.
|
|
|
Electronically Configurable Transfer Structures
Langhammer, Lukáš ; Hospodka, Jiří (referee) ; Vávra, Jiří (referee) ; Šotner, Roman (advisor)
Práce se zaměřuje na vývoj a výzkum v oblasti elektronicky rekonfigurovatelných přenosových struktur. Primárním cílem je návrh těchto struktur za užití moderních elektronicky řiditelných aktivních prvků. V práci je prezentováno množství elektronicky rekonfigurovatelných filtračních struktur, jež byly vytvořeny za užití různých návrhových metod. Důraz je dále kladen na možnost řídit některý z typických parametrů filtru pomocí řiditelných aktivních prvků. Práce dále obsahuje několik obvodových návrhů aktivních prvků či stavebních bloků s vhodně řešenou elektronickou řiditelností, tak, aby tyto prvky/bloky mohly být dále použity pro návrh elektronicky rekonfigurovatelných filtrů. Správnost návrhu jednotlivých zapojení je podpořena PSpice a Cadence simulacemi s modely na tranzistorové úrovni. Vybraná zapojení jsou dále realizována za pomocí dostupných aktivních prvků a podrobena experimentálnímu měření.
|
|
|
Filters with current mirrors
Kotlán, Petr ; Herencsár, Norbert (referee) ; Lattenberg, Ivo (advisor)
A second-order frequency-selection filters with current amplifier design is shortly shown in this bachelor's thesis. An autonomous circuit was modified to be conform with all rules of functionality of filters. A few version of autonomous circuit are shown i this text. The circuits were simulated by a program Microcap expecially transient and AC analysis. The current amplifier was replaced by a current mirror or more precisely by a current inverter. A direct-current and his relations to suplied harmonic signal were investigated. A deformation of a harmonic signal is unwanted. This deformation is ussualy created by the transistors in nonlinear mode. This current have to have special ratio to the alternating-current. A sixth-order filter was created by cascade connection of three second-order blocks. This more intricated circuit is correct. A correct rate of characteristic due for low-pass, high-pass and band-pass was shown thanks AC analysis.
|
|
|
Frequency filters with tunable current amplifier
Jemelík, Lukáš ; Lattenberg, Ivo (referee) ; Jeřábek, Jan (advisor)
The bachelor thesis deals with the designing of active frequency filters of the second – order which are make use of active elements. These filters were designed by means of autonomous circuits. Digitally Controlled Current Amplifier DCCA and Multiple Output Current Follower MO-CF were used as active elements. Designed filters works in current mode. The bachelor thesis is divided into five chapters. In the introductory part there are described general characters of frequency filters, the second part contains the description of the active elements, the third part includes the method of construction high – order filters. In fourth part there are described particular circuitry, their transmission functions and confirmation of their functionality in computer software.
|
guest ::
